Layout; Items Supplied; Intended Use; Technical Data - EINHELL 9-13 Manual De Instrucciones Original

2. Layout (Fig. 1)
1. Viewing window
2. Safety screen
3. Solar cell
4. Safety level controller
5. Locking button
6. Housing
7. Rear head band
8. Top head band
9. Locking button for rear headband
10. Front headband
11. Sensitivity setting wheel
12. Delay time setting wheel
13. Optical unit

3. Items supplied

Automatic welding screen
n
Spare safety screen
n

4. Intended use

The automatic welding protection filter with manually
adjustable safety level is designed to protect the
eyes from the arc created by the following welding
methods: Welding with encased electrodes,
MIG/MAG welding, TIG welding, arc-air gouging,
plasma fusion cutting and micro plasma welding.
Important.
The automatic welding screen is not designed for
laser welding.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Automatic welding protection filter with safety level
adjustable by hand
Test number:
Bright level:
Dark level (see Table 10.1):
Safety level 9 – 13 (adjustable)
Bright to dark switching time:
Activation sensitivity:
Dark to bright switching time (infinitely adjustable):
Optical class:
Scattered light class:
Homogeneity class:
Angular dependence:
Size of viewing window:
Power supply:
Mechanical strength of the viewing screen:
S (increased mechanical strength)
Weight:

6. Before starting the equipment

Remove the backing foil from the safety screen
n
(Fig. 1/Item 2) and the inside of the viewing
window (Fig. 1/Item 1).
Check the safety screen and viewing window
n
(Fig. 1/Item 1; 2) for signs of cracks, scratches or
other damage.
Using a bright light source (for example a lighter)
n
make sure that the automatic welding screen is
in perfect working order every time before you
start the welding work.

7. Operation

7.1 Setting the head circumference (Figure 2)
To reduce the size of the rear headband (Item 7),
turn the locking button for the rear headband (Item 9)
clockwise.
To increase the size of the rear headband (Item 7),
press the locking button for the rear headband (Item
9) and turn it anti-clockwise.
4/9-13 Einhell 1/2/1/1/379 CE
Safety level 4
1/30000s
infinitely adjustable
0.25 – 0.35s ("short" setting)
0.5 – 0.8s ("long" setting)
98 x 43mm
Solar-powered
GB
1
2
1
1
450 g
15