Kohler K-1126-H Diagrama De Instalación página 2

21"
(53.3 cm)
1"
(2.5 cm)
8" (20.3 cm)
2-1/2"
(6.4 cm)
Product Information
Applicable product:
Drop-in with heater
Tile flange with heater, left drain
Tile flange with heater, right drain
Fixture*:
Bathing well:
Basin area, bottom 46" (116.8 cm) x 21" (53.3 cm)
Basin area, top 55" (139.7 cm) x 31" (78.7 cm)
Weight 72.5 lbs (32.9 kg)
To overflow:
Water depth 14" (35.6 cm)
Capacity 57 gal (215.8 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/4" (148 cm) x 40-1/2" (102.9 cm)
V
Pump: 1-speed 120
Heater: 1.5 kW 120
Minimum access panel
pump/control (required):
1014729-1-B
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1126-H
K-1126-LH
K-1126-RH
Hz A
60 7.5
60 12.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
Pump/Control Access
(If Apron Is Not Used)
20" (50.8 cm) W x
15" (38.1 cm) H
16-5/8"
18-1/8"
(42.2 cm)
(46 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
33 lbs/square foot (160 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
Tile Flange
Detail
42" (106.7 cm)
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
1-1/2" OD
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.