Sanyo POA-MD07MCI Instalación Y Funcionamiento página 6

Remove Imager Box from Projector
CAUTION : Do not remove the Imager Box from the projector while the projector is
on. It may damage data in a memory card and the card itself.
Press the LATCH BUTTON to the arrow
direction. Then pull and remove the
Imager Box.
Load and Remove CF Card
Load CF Card
Insert the CF Card into the CF Card slot
of the Imager Box until the EJECT BUT-
TON pops out.
• Do not insert it in the wrong way. It may damage
the equipment.
Remove CF Card
1 Press the CF CARD EJECT BUT-
TON. The CF Card is released.
2
Pull out the CF Card from the Imager
Box.
Do not remove a CF Card while
the indicator is lighting. It may
damage the card and the data
CAUTION
in it.
6
CAUTION :Removing by force may
damage the Imager Box.
(Fig.-3)
Pull and remove the
Imager Box.
CF CARD
EJECT BUTTON
Insert the CF Card with the
mark L ahead.
Press the LATCH
BUTTON.
INDICATOR
(Fig.-4)