AIPTEK PocketCinema T10 Manual De Instrucciones página 15

Connecting the projector to your media players
Before connecting your media player to projector, you need to have media player
dedicated composite AV-out cable and projector AV cable ready.
Projector AV cable
AV OUT
<AV cable>
1. Connect Composite AV-out cable to media player.
2. Connect both AV cables (Yellow to Yellow, white to white and red to red).
3. Now you can project image and audio from projector.
4. Adjust the Focus Ring to have a better view.
Connecting the projector to your laptop PC
Please make sure that your laptop PC is equipped with S-video port.
Before connecting your laptop PC to projector, you need to have Composite/S-video
adapter (not included in package), RCA (dual male) connector (not included in package),
and projector AV cable ready
(red)
AV OUT
(white)
(yellow)
<AV cable>
1. Turn on laptop PC and projector first.
2. Connect one end of the Composite/S-video adapter to the S-video port of laptop PC and the
other end to RCA (dual male) connector.
3. Connect the other end of RCA (dual male) connector to projector AV cable (yellow).
4. Connect the AV cable to the AV jack of projector.
5. Select "AV in" when you are asked to select "AV in" or "Audio out".
6. Switch the laptop display mode from LCD mode to TV mode.
7. Adjust the Focus Ring to have a better view
To avoid over heat, this projector will be turned off automatically after 3 hours
continuous play.
Composite AV-out
cable
(red)
(white)
(yellow)
RCA (dual male)
connector
Video/Music
Player
(red)
Mobile Phone
(white)
Digital camcorder/
(yellow)
camera
Portable Media
Player
S-video cable
S-video port