Charging; Operation - Unold 87865 Manual De Instrucciones

chargIng

1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. Connect the jack of the lead cable to the
plug socket on the charger.
3. Connect the mains adapter to the wall
socket.
4. Put the appliance in the charger ensuring
it is switched off. Make sure that the
appliance is correctly inserted as otherwise
the appliance will not be charged properly.
5. Make sure that the charger is placed firmly.
6. The indicator light on the appliance lights
up, indicating that the appliance is charged.
7. Before first use, the appliance has to be
charged for at least 16 hours. Any further
charging process will last approx. 8 hours.
8. Depending on the application and the hair
characteristics the appliance can be used
30 minutes before needing to be recharged.
The maximum capacity of the accumulators

oPeratIon

The easiest way of shaving is with dry skin and hair. To obtain perfect results, always work against the
direction of hair growth. Shaving will be easier if you tense the skin of the part you want to shave with
your free hand. After shaving we recommend to cream the depilated parts with a mild body lotion
in order to avoid skin irritation. If you have sensitive skin or depilate sensitive parts, we recommend
you to treat these parts only once in order to avoid skin irritation. If you have never used an electric
shaver before, your skin might need to get used to this kind of depilation. When shaving daily, it
may take two to three weeks until your skin gets used to it and does not show any further irritation.
1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. Prepare the appliance as described in the
chapter „Charging".
3. Switch the appliance on pushing the button
EIN/AUS [ON/OFF].
4. Place the shaving head on the skin and
work against the direction of hair growth, if
possible.
5. Make sure that the shaving head is always in
contact with the skin. Shaving will be easier,
when you tense the skin with your free hand.
trim attachments
6. The trim attachments help to cut the hair to
the desired length.
7. The scope of supply includes three different
attachments: 1,3 mm; 2,5 mm and 3,5 mm.
8. The corresponding length is printed on the
inside of each trim attachment.
12
is only achieved after being charged several
times.
9. As soon as the appliance is charged, unplug
the charger from the wall socket.
10. Only charge the appliance, when the
accumulators
This ensures that the performance of the
accumulators lasts longer.
11. You may also connect the lead cable directly
to the appliance, when the accumulators
are completely empty and you have not yet
finished shaving. Connect the lead cable
to the plug socket in the lower part of the
appliance and connect the mains adapter
to the wall socket. Please do not use the
appliance this way for more than 30 minutes
and let it cool off for 20 minutes afterwards.
12. Attention: Never connect the appliance
to the mains without the accumulators
inserted.
9. Switch the appliance off pushing the button
EIN/AUS [ON/OFF].
10. Attach the desired trim attachment to the
appliance, making sure that it latches into
place.
11. Switch the appliance on pushing the button
EIN/AUS [ON/OFF].
12. Place the shaving head of the appliance
on the skin and cut the hair to the desired
length.
13. After finishing the shave, switch the
appliance off pushing the button EIN/AUS
[ON/OFF].
14. To detach the trim attachment, lift it slightly
on one side and pull it off the appliance.
attention: the cutter head and the
shaver foil have sharp and pointed
parts. handle with care in order to
avoid injuries!
are completely empty.