Connecting The Device; Removing The Device; Safety Instructions - Intenso EXTERNAL HARD DRIVE KIT Manual Del Usuario

Connecting the device

To connect the EXTERNAL HARD DRIVE KIT to your computer, please use only the supplied USB
cable. Connect the USB 3.0 plug with the EXTERNAL HARD DRIVE KIT and the plug of the USB
cable end with your computer. At first use, a new hard drive has to be initialised and formatted by
the operating system to be displayed by the system. For further details please refer to the Help
Section of your operating system provider. You can find a Video Tutorial on our website or simply
scan the QR code on the packaging. As soon as the set-up is concluded, the integrated LED lights
up. The LED flashes when a write or read operation is carried out.

Removing the device

Depending on the used operating system, the EXTERNAL HARD DRIVE KIT must be logged off
before the connection to the computer is interrupted. For further details please refer to the Help
Section of your operating system provider. The device may not be removed when it is still being
accessed (flashing LED). This can lead to damages and/or data loss. Please close all the files loca-
ted on the hard drive (photos, documents, etc.) before removing the EXTERNAL HARD DRIVE KIT.

SAFETY INSTRUCTIONS

Dangers for children and persons with restricted physical, sensory or
mental abilities:
Children often underestimate dangers or do not recognise them at all. This device is not intended
to be used by persons (including children) with restricted sensory, physical or mental abilities
or lack of experience and/or knowledge, unless they are supervised by a person responsible for
their safety or received instructions from the person on how to use the device and they have
understood the resultant dangers. Unsupervised children should not have access to the device.
Make sure that children do not play with the device.
LED USB 3.0 Micro B
EN - Page 4 of 7