Specifications; Maintenance - KING 900 Manual De Instrucciones

INSTRUCTION MANUAL

SPECIFICATIONS

Tracking Range: Depth 8 feet (2.4m) (LO-F, 2kHz)
Tracking Signals: Direct Connect (LO-F) 2 kHz
Direct Connect (HI-F) 33 kHz
Wireless (BCST or Clamp) 175 kHz
Passive AC 50-60 Hz
Clamp Interior Diameter: 3.5 Inches (85mm)
Direct Connect Signal Output: 900V peak with no load 1W maximum
Audio Output: Headset and Loudspeaker
Power Source: Transmitter - Eight (8) 'D' cells (LR20) alkaline or NiMH or
External 120VAC Powering
Receiver - One (1) 9V (6LR61)
I
16 KING INNOVATION

MAINTENANCE

WARNING
Electric shock hazard:
Before removing the case or battery cover, remove the
test leads from the circuit and shut off the unit.
Failure to observe this warning could result in severe
injury or death.
BATTERY REPLACEMENT
Transmitter
1. Turn the unit off.
2. Remove the battery cover.
3. Install/replace the eight (8) D-cell batteries. (Observe polarity)
4. Replace the battery cover.
Receiver
1. Remove screw.
2. Install /replace 9V battery. (Observe polarity)
3. Replace cover and screw.
Cleaning
Periodically wipe with a damp cloth and mild detergent;
do not use abrasives or solvents.
WARRANTY
King Innovation products are guaranteed against faulty materials
®
or workmanship for a period of one year from date of purchase.
Contact factory for full warranty information.
For technical support, service inquiries or warranty requests
call (877) 771-8885.
KING 900
I
KING INNOVATION 17