Publicidad
Idiomas disponibles
Idiomas disponibles
EDS-CAM
Display unit for universal
measuring unit for
heavy current variables
SINEAX CAM
Installation instructions
Devices may only
be disposed of
in a professional manner!
The installation and commissioning must be performed by trained
staff members only.
The device must be closed down if safe operation is not possible any
more (e.g. visible damage). The device must be returned to our plant
or to a service centre authorized by us.
An intervention in the device cancels any warranty claim!
1. Scope of supply
1 display unit EDS-CAM
1 installation instructions
1 operating instructions display D
1 operating instructions display E
2. Brief description
The EDS-CAM is a display unit for the visualization of measurement
data of the main device SINEAX CAM. It is connected to the CAM
using a 4-wire cable and gets the necessary power from the CAM.
3. Technical data
Power supply
The SINEAX CAM provides the auxiliary power for the EDS-CAM. The
power consumption of the basic unit is increased by approx. 1VA if
the EDS-CAM is connected.
The Power LED is not in operation. The pro-
per service of the device is shown by means
of the display.
Ambient conditions
Operating temperature:
Storage temperature:
Relative humidity:
Altitude:
Indoor use statement!
Camille Bauer Metrawatt AG
Aargauerstrasse 7
CH-5610 Wohlen/Switzerland
Telefon +41 56 618 21 11
Telefax +41 56 618 21 21
info@cbmag.com
www.camillebauer.com
www.camillebauer.com/edscam-en
-10 till +55°C
-25 till +70°C
<95% no condensation
2000m max.
157611
Communication to SINEAX CAM
Schnittstelle:
Leitungslänge:
Mechanical attributes
Housing:
Screw length:
Orientation:
Housing material:
Flammability class:
Weight:
4. Electrical connections
The connection of the EDS-CAM to the SINEAX CAM may be per-
formed using the cable 168949, available as an accessory. request
It is important to ensure a suitable strain relief.
Alternatively the plug-in terminal of the EDS-CAM can also be con-
nected to the Subbus plug-in terminal of the SINEAX CAM using an
appropriate cable. We recommend using a cable with two twisted
pair wires each.
Possible cross-sections
fixed:
flexible:
Conductor sleeve:
AWG/kcmil:
Skinning length:
EDS - CAM
V+
Mat: 157968/1234567/001
+A
Man: 10/27
-B
NLBxxx
GND
Pin assignment of the EDS-CAM plug-in terminal
5. Assembly
For the assembly of the device three round holes must be drilled in
the front panel. The mounting is then performed by means of two
screws.
The true to scale drilling plan may be found in the annex. It can be
used as a template.
PM1000535 000 01
RS485
max. 20m
187 x 67 x 23mm
20mm
Any
Polycarbonate
V-0 acc. UL94, self-extinguishing,
non-dripping, free of halogen
170g
0,14mm
- 0,5mm
2
2
0,2mm
- 0,5mm
2
2
0,25mm
- 0,5mm
2
2
24 - 20
6mm
Camille Bauer AG
Switzerland
06-17
Publicidad
