Publicidad
Step-1 The headset must be powered off before you begin to initiate the paring.
Step-2 press and hold the answer/end key for 10-15 second until the blue and red light
flash alternatively. The headset is now in paring mode.
Step-3 Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth
devices. Check the user guide of your phone for instructions.
Step-4 Select the headset (vida-luke) from the list of found devices.
Step-5 When asked the PIN code, please enter "0000" to pair and connect the headset to your
phone. In some phones you may need to make the connection separately after pairing. See the
user guide of your phone for details.
If the pairing is successful, the headset enters idle state and blue light will flash flashes 1 time
every 5 seconds. The headset's name appears in the phone menu where you can view the
currently paired Bluetooth devices.
You only need to pair the headset with your phone once.
Note for Multi-link use: In order to pair a second mobile, please press the volume - button for
6 seconds until the red and blue light flashes alternatively, headset is ready into pairing mode
and you can pair the second mobile. Turn off the headset and re-turn on it, both mobile was
ready under links.
To activate the Multi-link-function, please press volume -/+ at the same time for
3seconds,headset will get into the multilink Mode, the Blue LED indicate 2 seconds
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
· Ensure that the headset is charged, switched on, paired with and connected to your
phone.
· Ensure that the Bluetooth feature is activated on your phone.
· Check that the headset is within 10 meter(30 feet ) of your phone and that there are no
obstructions between the headset and the phone, such as walls or other electronic devices.
If no paring is made over a period of time, the headset will retreat paring mode. You have to
turn off the headset and operate again.
7. Basic use
7.1
Make a call
To make a call, use your phone in the normal way when the headset is connected to your phone.
The sound will be transmitted to the headset automatically.
7.2
Answer a call
When there is incoming call, press the answer/end key, or use the phone keys to answer the call.
7.3
End a call
After finishing the call, press the answer/end key, or use the phone keys to end the call.
7.4
Refuse a call
When there is incoming call, press and hold answer/end button for 3 seconds until you can hear
beep sound from the headset.
7.5
Voice dialing (dialing a number by saying a name)
It is possible to make a call directly from the headset using voice recognition. To use this voice
dialing function, your mobile phone must provide this option and corresponding voice samples
Publicidad
