Publicidad
Idiomas disponibles
Idiomas disponibles
Street number module for front door unit
The street number module for front door unit is an auxiliary
module that complete the front door units of the video entryphone
system with the street number of the residence or the name of the
stair case.
The module is backlit by a LED. The power supply current is sup-
plied by the main modules (GW 18 301, GW 18 302, GW 18 311 or
GW 18 312), through the provided multi-pole cable with polarised
connectors.
2
2
1
1
Connection diagram
towards other
8
modules for
front door unit
Installation
ATTENTION: the device must only be installed by
qualified personnel, observing the current regu-
lations and the guidelines for video entryphone
installations, which can be found in the Technical
System Manual.
The street number module must always be combined with a main
module (GW 18 301, GW 18 302, GW 18 311 or GW 18 312) and
assembled using the suitable frames (GW 18 122, GW 18 123)
in the flush-mounting boxes (GW 18 132, GW 18 133) or wall-
mounting boxes (GW 18 142, GW 18 143).
GW 18 331
1
Connector for
2
connecting to other
modules for front
door unit
2
Front frame fixing tab
2
Components
towards other
8
modules for
front door unit
ENGLISH
Label insertion
Place the label on the inner part of the module and protect it with the
transparent panel, fixing everything by reinserting the module's front
frame.
Fixing the box frame
Fix the street number module on the module holder frame using the
provided screws. Attention: the side with the connectors must face
downwards (towards the module holder frame hinge).
Electric connections
ATTENTION: before making the electric connections
make sure all the equipment and cables are not powered.
If an additional module must be powered (example: 4 push-button mo-
dule, call module with electronic index), remove the cap that protects the
second connector.
Cleaning the module
Use a dry cloth to clean the street number module if necessary.
Pack Contents
1 Street number module for front door unit
1 Fitted multi-pole connection cable - 0.25 m
1 Translucent label
1 Adhesive number and letter kit
Technical data
Power supply
Current consumption
Lighting elements
Connection to other modules for
front door unit
Usage environment
Operating temperature
Storage temperature
Relative humidity
Weight
Degree of protection
Dimensions (L x H x D)
Label dimensions (L x H)
Reference standards
Press on the 4 fixing tabs to
remove the front grey frame
and the transparent panel that
2
protects the label.
1
Place the street or staircase
number on the translucent label
using the supplied adhesive
numbers and letters.
Connect the street number module to the other
modules using the fitted multi-pole cable that is
provided. The cable connectors are polarised for
proper connection.
The cable may be connected indifferently in
both rear connectors.
2 Frame fixing screws
1 Instruction sheet
Via the audio or audio/video module
60 mA
4 white LEDs for rear illumination
2 - 8-pin polarised through-connectors
Outdoor/indoor, protected from the rain
and water infiltrations
-15 ÷ +50 °C
-15 ÷ +70 °C
Max. 93% (non condensative)
0.13 kg
IP44
115 x 85 x 43.5 mm
81 x 75 mm
Electromagnetic compatibility:
2004/108/EC, EN 61000-6-1, EN 61000-6-3
Publicidad
