CHI 13101 Manual De Uso página 6

How to Dry and Steam Iron
w CAUTION
temperature setting or failing to allow the iron to preheat for
2 minutes can result in hot water dripping from the soleplate.
1. To Steam Iron: Make sure iron is unplugged.
Lift Water Fill Door and add untreated tap water
to the MAX Fill Line through the opening. If you
have extremely hard water, mix 50% untreated
tap water with 50% distilled or mineralized
water for use in the iron. Press to snap
cover closed. Plug into outlet and the red Power Indicator
Light comes on. Turn Temperature Setting Dial to select
temperature setting. Linen, cotton, or wool are recommended
for steaming. Move Adjustable Steam Lever to desired
amount of steam.
To Dry Iron: Plug into outlet. Turn Temperature
Setting Dial to select temperature setting.
2. Preheat 2 minutes to reach desired
temperature. You are now ready to iron.
3. To turn iron off, move Adjustable Steam Lever
to (Dry Iron) and turn Temperature Setting Dial to min.
Unplug.
6
Burn Hazard: Attempting to steam iron on a lower