Brentwood Appliances JB-206 Instrucciones De Funcionamiento Y Seguridad página 5

1. Place the ingredients you wish to process into the plastic jug.
2. Place the lid on the glass jug and close securely. Place the measuring cap into the hole in
the lid and turn clockwise to lock.
3. Switch on the motor base:
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This is
a result of the heating element chemical reaction. It quickly goes away.
Setting Use
Chop Blends in a light pulse. Chops foods.
Mix Blends and mixes. Great for salad dressings.
Grate Blends mid speed. Grates cheeses and harder foods.
Blend Blends high. Smoothies and ice drinks
Liquefy Blends high and liquefies cooked veggies for soups or fruits.
P Pulse-for ice crushing & short, powerful impulse blending
(This switch does not permanently engage in the 'P' setting You have to hold the switch in
the 'P' setting or turn it repeatedly into the 'P' setting)
4. After using the Blender, push the OFF button, and then unplug the product from the
electrical outlet.
WARNING: Always unplug the product from the electrical outlet when it is not in use or will
be left unattended.
5. To remove the plastic jug, rotate the jug to unlock it.
Useful Tips:
• To achieve the best results when pureeing solid ingredients, place small portions into the
Blender one by one instead of placing a large quantity all at once.
• If you are processing solid ingredients, cut them into small pieces (2-3cm) first.
• When mixing solid ingredients start off first with a small amount of liquid. Gradually add
more and more liquid through the opening in the lid.
• Always place your hand on top of the blender when you are operating the device.
• Be careful when processing hot liquids, the heat can cause blender lid to pop off.
• For blending solid or very thick liquid ingredients we recommend that you use the
blenders Pulse mode to prevent the blades from becoming stuck.
• When blending hot foods open the filler cap to vent steam. Tilt the cap away from you and
keep hands away from the cover opening to prevent possible burns.
Cleaning Your Blender:
WARNING: Never immerse the motor base in water. Wipe it only with a moist cloth.
1. Always unplug the product and allow it to cool before cleaning or storing it.
2. Simple Rinse: empty the glass jug and fill it with water and a dot of dish soap. Place the jug
on the motor block and turn the switch several times into the 'Pulse' setting. Empty the
glass jug and rinse until clean.
3. For Deep Cleaning: ensure the glass jug is completely empty before disassembling the
base. Be very careful when handling the cutting blade. All Removable parts from the jar are
dishwasher safe.
5