Levelling; Floor Anchoring - Miele PRI 217 Instalación

Levelling

To ensure the ironer functions correctly and energy efficiently, it
must be levelled horizontally with the screw feet.
Dismantle the mounting flaps on the left and right sides.

Align the roller and the side columns using the screw feet and a

spirit level. The screw feet under the side columns can be un-
screwed to a maximum of 60 mm.
After levelling the machine secure the screw feet so they cannot

come loose.

Floor anchoring

A suitable anchoring kit for the ironer is available to purchase from
Miele. Alternatively the clamps that were used for securing the ma-
chine to the wooden pallet can be used for securing it to the floor.
4 0 m m
2 0 m m
Clamps from the transport pallet
en - Installation and planning notes
27