Equipment Description; Technical Features; Installation; Location - J.P. SELECTA HIGHTEMP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTION MANUAL
Please, make sure that the equip-
ment is connected to an electrical
voltage that coincides with the
indicated in the features plate.
J
.P. SELECTA s.a.u.
CODE 80028 REV E

4. Equipment Description

High temperature ovens HIGHTEMP have been designed with fan assisted air
circulation, that allow adjustable temperature from 60ºC up to 400ºC.
Temperature is controlled by a digital regulator type PID.
As a safety element, a second temperature regulator acts as a temperature limiter.
The motor can be activated during the cooling cycle, regardless the heater.

5. Technical Features

(See also the oven's features plate.)
• Maximum temperature:
• Minimum temperature:
• Volume:
• Fuse size 10x38 gG: (Supply 400V III)
• Fuse size 10x38 gG: (Supply 230V III)
• Max. Power:
• Power Supply:
• Shelf guides:
• Noise level:
• Inner chamber materials:
• Weight:

6. Installation

6.1 Location

You must choose a suitable location for the equipment in order to avoid accidents
and troubles to other laboratory activities, bearing in mind that this machine produ-
ces an unpleasant noise level, and that the oven generates fumes when operating.
It is important that the location meets the following conditions:
- It should be wide enough to operate with safety.
- There should be a ventilated area, either by windows or extractor fan, just in
case there's a fumes leakage.
- There should be a three-phase + neutral wire to the mains.
- The equipment should be placed over a flat solid surface, suitable for the equi-
pment weight.
- For a better operation of the equipment, do not expose it near sunny places
nor heating sources.

6.2 Power Supply Connection

Take care when connecting this oven to the mains.
As it has a three-phase supply, the oven motor would turn one-way or the other
depending on how the phases are connected.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
09/2021
Page: 11
400ºC
60ºC
80 litres
Power: 3x 16A
Control: 1x 2A
Power: 3x 20A
Control: 1x 2A
4500W
230 / 400V III 50 Hz
4
70 dB - 80dB
Stainless steel
75 Kg
Tel 34 937 700 877 Fax 34 937 702 362

Publicidad

Tabla de contenido
loading

Productos relacionados para J.P. SELECTA HIGHTEMP

Este manual también es adecuado para:

2001406

Tabla de contenido