FIGURE 2
2
2
4
16
#6 BOLT M6*16
Step 2:
Fasten the center connector with ring (#4) to the middle
of the legs (#2) by using bolts (#6) and washers (#8).
Keep the bolts loose. See Figure 2.
FIGURE 4
Step 4:
Turn the table to its upright position. See Figure 4.
Note:
To use an umbrella with this table, remove the plastic
center plug and put the umbrella pole through the table
top and center connector ring.
Warranty
• This product is covered by Courtyard Creations Inc.'s. one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
Missing A Part?
No Need To Go Back To
The store where you made your purchase
does not stock parts for this item.
whether they are missing or damaged,
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
service.cci@polywares.com
V-5
8
8
2
6
6
9
9
2
STOP!
The Store
If you need parts,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
For further assistance,
please visit us at
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
Step 3:
Fasten the center connector with ring (#4) to the
supports (#3) by using bolts (#7) and washers (#8).
Make sure that all of the bolts have been tightened
completely and cover them with bolt caps (#9).
See Figure 3.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• Wash glass with mild soap and water, rinse thoroughly,
and dry completely.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure the proper performance and
safety of your table.
• When moving the table, remove the umbrella and lift.
Do not drag this table.
• We recommend the use of furniture covers when not
in use.
• In order to prolong the life and beauty of your table,
we recommend that it be stored in a dry and protected
area during off season periods.
• Tempered glass has been used for increased strength
and safety of your table. However, during windy
conditions the umbrella should be lowered and/or
removed.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
8
7
9
4
3
3
25
#7 BOLT M6*25