KlipXtreme Aristos Manual De Instrucciones página 5

Buttons
Press this button briefly to turn the soundbar on or off.
1. Power button
Press this button briefly to turn on the Bluetooth
2. Bluetooth ® mode
and starts pairing the soundbar.
Press this button briefly to switch to the optical digital
3. Optical mode
mode to play audio coming from a device connected to
the optical digital port.
Press this button briefly to select the source device
4. Auxiliary mode
connected to the 3.5mm input jack.
In BT mode, press this button to select the next track on
5. Next track
your play list.
Press any of these buttons to select the EQ profile of your
6. 9. 10. EQ sound profiles
choice (Game, Music or Video).
(Game, Music and Video)
In BT mode, press this button to select the previous track
7. Previous track
on your play list.
Press this button to play or pause the audio coming from
8. Play/Pause
the soundbar.
Description
® function
Buttons
Press the Vol - button briefly to lower the volume coming
11. Vol. -
from the soundbar.
Press the Vol + button briefly to increase the volume
12. Vol. +
coming from the soundbar.
Mutes the audio coming from the soundbar. Press it again
13. Mute
to unmute the soundbar.
IV. Preliminary steps
1. The soundbar can be placed on a desktop or hang on the wall.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface. Drill holes must be placed about 21 inches
apart from each other.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
4. Drill pilot holes and insert the supplied anchors if installing the unit on a
concrete or brick wall.
Description
21in