Moulinex On The Go LM1B1D10 Manual De Instrucciones página 26

that the arrow matches with the open lock. Turn the jug clockwise until
the arrow matches with the closed lock.
• Place the ingredients in the blender jug (C)
• Lock the lid (B) onto the blender jug (C)
• Fit the cap (A) into the opening in the lid (B) and turn it to lock it into
place. (Fig. 6).
2.2 Using the bottle :
• Caution : Do not blend hot liquids higher than 70°C
• Place the ingredients in the bottle (H1).
• Close the bottle with the blade assembly (D+E) by screwing them
together until the white arrow is on the locking area between the
minus and plus sign
• Place the bottle (H+D+E) onto the motor unit (F) so that the arrow
matches with the open lock, then turn the bottle until the arrow
matches with the closed lock.
3. Never add or process liquids or ingredients that have a temperature
higher than 70°C. Instead cool them slightly first.
The blender jug (C) and plastic bottle (H1) have a 750ml MAX capacity.
Do not fill it with food or liquids past the MAX mark. Refer to the table
below for recipe quantities.
4. Plug in the appliance and switch it on by pressing the button. Press and
hold the button until blending is complete. Blending stops once the
button is released. To pulse food, repeatedly operate the appliance in
short bursts. The blender will not operate if the blender jug or bottle are
not correctly locked.
5. Hold the appliance firmly with one hand during operation. Do not run
for more than 2 minutes.
6. After using the bottle :
Once you have finished blending, turn the blender bottle upright so
that the blade unit (D+E) is at the top and then unscrew it from the
bottle (H) (Fig.9). Then place the bottle lid on to the blender bottle and
screw into place. (Fig.10). The blender bottle is ready to drink from or
take with you.
26
(Fig. 7).
(Fig. 8)
(Fig. 2+3).
(Fig. 4).
(Fig. 5).