Connecting To Component Video Equipment - Liesegang E.MOTION 4100 Guía Rápida

WXGA DLP Front Projector Quick Guide
Connecting to Video Equipment Using an S-video
or a Composite Video Cable
Using an S-video or a composite video cable, a VCR, laser
disc player or other video equipment can be connected to
INPUT 3 input terminals.
VCR or other video device
To S-video output terminal
To Video output terminal
Pb/Cb Y
Pr/Cr
Pb/Cb Y
Pr/Cr
S-VIDEO
VIDEO
RS-232
Made in Taiwan
the lamp. down.
cover while replacing sufficientl y cooled
the lamp to them chassis until they have
WARN ING ts except objects next object or wall.
not disassem ble any slots, componen lamp and ventilation holes. t environme slots nt. and nearest
• Do not touch any objects ventilation through water or in between a rainy/mois ventilation
• Never • Do not use insert this unit near (10 cm) of space
• Do • Keep at least 0.3 foot
Composite video cable
(commercially available)
S-video cable
(commercially available)
Y
Pb /Cb
Pr/ Cr
Y
Pb /Cb
Pr/ Cr
O
S-V IDE
VID EO
2
RS -23
Note: The INPUT 3 (S-VIDEO) terminal uses a video signal system in
which the picture is separated into color and luminance signals to realize a
higher-quality image. To view a higher-quality image, use a commercially
available S-video cable to connect the INPUT 3 terminal and the S-video
output terminal on the video equipment.

Connecting to Component Video Equipment

Use a component cable when connecting to the INPUT 1 or
2 terminal and component video equipment such as DVD
players and DTV* decoders.
To analog component
output terminal
DVD player or
DTV* decoder
Component cable
(commercially available)
*DTV is an umbrella term used to
describe the new digital television
Pr/C r
system in the United States.
Y
Pb/C b
Pr/C r
S-VI DEO
EO
RS- 232
Note: When connecting the projector to the video equipment in this way,
select "Component 1 or 2" for "Input Source" in the "Main" menu.
The component jack for a DVD and so forth may be indi-
cated with Y, CB or CR. Connect each jack as shown below.
Projector Y P
B
DVD player or
DTV decoder Y C
B
Connecting to Video Equipment with a DVI Cable
Use the DVI cable when connecting to the INPUT 4 terminal
and video equipment with the DVI output terminal such as
DVD players and DTV* decoders.
3
*DTV is an umbrella term used to
describe the new digital television
Pb/Cb Y
Y Pr/Cr system in the United States.
Pb/Cb
Pr/Cr
VIDEO S-VIDEO
RS-232 in Taiwan
the lamp. Made
replacing ly cooled down.
chassis cover while they have sufficient
nts except the lamp next to them until or wall.
WAR NING ble any compone lamp and objects n holes. ent. and nearest object
not disassem ventilatio n slots, through a rainy/mo ventilatio ventilatio ist environm n slots
• Do • Do not touch any objects near water or in of space between
• Never not use insert this unit 0.3 foot (10 cm)
• Do • Keep at least
Note: Select the input signal type of the video equipment.
Connecting to Video Equipment with a DVI-D to
HDMI Cable
Use a DVI to HDMI cable when connecting HDMI video
Y
Pb/C b
equipment such as DVD players to INPUT 4 terminal.
To HDMI output terminal
P
DVD player or
R
DTV* decoder
C
R
*DTV is the umbrella term used to
describe the new digital television
system in the United States.
1.Connect a DVI-D to HDMI cable to the projector.
2.Secure the connectors by tightening the thumbscrews.
3.Connect the above cable to the video equipment.
Note: Select the input signal type of the video equipment.
Connections (continued)
DVD player or
DTV* decoder
Y
Pb/Cb
Y Pr/Cr
Pr/Cr Pb/Cb
S-VIDEO
VIDEO
RS-232 in Taiwan
Made
the lamp. ly cooled down.
cover while have replacing sufficient
ING the lamp to them chassis until they or wall.
WARN ble any componen and ts except objects holes. next nt. nearest object
not disassem slots, ventilation lamp a rainy/mois t environme slots and
• Do • Do not touch any objects ventilation near through water of space or in between ventilation
• Never not use insert this unit 0.3 foot (10 cm)
• Do • Keep at least
DVI-D cable
(sold separately)
Y
Pb/Cb
Pr/Cr
Pb/Cb Y
Pr/Cr
Pb/Cb Y
Pr/Cr
S-VIDEO
VIDEO
RS-232
Made in Taiwan
the lamp. down.
while sufficientl replacing y cooled
the lamp chassis until cover they have
WARN ING ts except objects next to them object or wall.
ble any slots, componen ventilation lamp and holes. t environme nt. slots and nearest
• Do not disassem not touch any objects ventilation through or in a rainy/mois between ventilation
• Do • Never insert this unit near (10 cm) water of space
• Do not use at least 0.3 foot
• Keep
DVI-D to HDMI cable
(commercially available)
Y
Pb/Cb
Pr/Cr