Before The First Use; Installation Of The Appliance - Princess 339600 Manual Del Usuario

Instruction manual

BEFORE THE FIRST USE

Installation of the appliance

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Insert the removable battery into the rear of the vacuum cleaner
unit.
• Your battery will have a nominal charge out of the box. If you find
that it runs out sooner than expected, simply follow the charging
instructions.
• Insert one end of the tube into the floor head and the other end
into the vacuum cleaner.
• The accessories can be attached directly to the device or for
cleaning high positions at the end of the extension tube.
6
Docking station installation
• Do not install on weak structures such as plaster walls and
compressed wood boards when their thickness is less than
10mm.
• To prevent fire or electric shock due to leakage, please do not
install it on metal walls.
• Hanging area must be flat.
• Wall holder must be placed in ambient temperature between 5°C
and 40°C.
• Ensure the screws will not damage any gas pipes, water pipes or
wires insides of the walls.
• No part of the appliance should touch the ground when placed on
the docking station.
• When installing the docking station, 4mm x 30mm screw is
suggested to be used on wooden surface.
• The 6mm x 32mm Wall plug and 4mm x 30mm screw should be
used on cement surface.