•
Pressing the upper part of the button (CARPET/FLOOR) below
the display changes the rotation speed of the brush. When the
left icon is shown in the display, the brush will rotate at maximum
speed. When you press this button again, the right icon will be
displayed and the rotation speed will be slower.
•
The crevice nozzle can be fitted in order to reach awkward
places.
•
There is a quick release foot peddle at the base of the tube.
Press down on this peddle to allow easy removal of the
motorised head. You are now able to attach and use one the
various accessories supplied.
•
The whole tube itself can also be removed for closer cleaning.
Again the accessories supplied will simply click into the main
body.
CLEANING AND MAINTENANCE
•
Make sure you regularly empty the dust container and clean the
filters.
•
The parts must be completely dry before installing.
•
Press the eject button, open the dust container and dump the
dust.
•
Twist dust container left to remove the dust container, and clean
the dust inside the container and on the bottom cover.
•
Twist the dust filter left to remove and clean the dust filter.
•
Twist right to remove the top cover, take out HEPA vertically, and
wash with water.
•
When the parts are fully dry, install again by reversing the above
steps.
•
Never immerse the appliance under water. The appliance and the
various parts are not dishwasher-proof.
Instruction manual
EN
9