V-TAC VT-8505 Instrucciones De Instalación página 9

Step 6: Connect the male and
felmale connectors for the
demister pad and LED,proceed
to slot the glass panel over the
back box.Finally,re-insert the
screw to fasten the two parts
together.
TOUCH SWITCH AND CCT CHANGING OPERATIONS:
(Applicable only for Model No.VT-8701 & VT-8602)
Note: The touch switch and CCT changing operation is only designed
for VT-8701 and VT-8602. The other models [VT-8505, VT-8700,
VT-8800, VT-8601] work with a normal switch.
MAINTENANCE & CAREFULLY
1. Ensure that the power is disconnected prior to cleaning.
2. To keep the finish of this product, wipe out with soft cloth periodically.
3. Do not use harsh chemical solvents, this may dis-colour or damage the finish.
4. Do not over-tighten screw on the terminal block
6.
Touch Sensor
1. On/Off - Touch to turn the light ON/OFF
2. Colour Temperature - Press and
hold the bottom to change the colour
temperature between cool white and
warm white.
ENGLISH