IVT AG-230-RC Manual Del Usuario página 8

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Rated power [W]
No-load speed [RPM]
Grinding disc Ø [mm]
Spindle bore
Weight [Kg]
Safety class
PART LIST
1. Lock-off button
2. Ventilation slots
3. Spindle locking button
4. Movable guard
5. On / Off switch
6. Auxiliary handle
7. Inner flange
8. Grinding / cutting wheel
9. Outer flange
10. Threads (for auxiliary handle)
11. Coded protrusion
12. Locking screw
13. Handle unlocking button
14. Pin spanner
CONTENT OF THE BOX
Instruction manual (1 pc), movable guard (1 pc), pin
spanner (1 pc), auxiliary handle (1 pc), carbon brushes
set (1 pc), hex wrench (1 pc).
INTENDED USE
This model of angle grinder is intended for cutting,
roughing and brushing of metal materials without the
use of water.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Model AG-230-RC
230 ~ 50
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙ On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙ Never allow children to use the tool. Children should
be supervised to ensure that they do not play with the
tool.
∙ Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙ The user is responsible for third parties while
working with the tool.
∙ People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
WARNING!
alcohol, medication and drugs, plus
states of illness, fever and fatigue will
affect your ability to react. Do not use
this tool in any of these situations.
∙ Make sure that all the protective devices (if present)
are fitted and are in good condition.
∙
Never operate the tool with defective safety devices
or guards (if present), or without safety devices in place.
∙
Inspect the entire tool to look for loose parts (e.g.
8
2300
6500
230
M14
6.7
II
The consumption of