ICY BOX IB-SPL1028-C Manual página 8

Installation
Type-C™
Follow the steps to install the HDMI
4k monitor installation
Step 1: Connecting graphics splitter USB Type-C™ cable to graphics
source, such as desktop or notebook PC USB Type-C™ output interface.
Step 2: Connecting graphics splitter HDMI® output to monitor (cables
are not included).
Maximum connection: 2 different types of HDMI
Step 3: Power on PC and monitors. Select monitors to correct input
source.
Step 4: Changing the display to clone mode, change the output display
resolution on your computer.
It is recommended that to use the same size, type and resolution mo-
nitors for connecting. Same type monitor means the monitors have the
same native resolution and display refresh rate.
After installation, you will see the same image on all monitors (clone
mode) or a single image spread across multiple monitors. To change the
display setting, simply change the graphic card output resolution via the
display properties page.
NOTE: Display resolution with 2 connected 4k monitors up to
3840x2160@30 Hz /each
Manual IB-SPL1028-C
graphics splitter.
®
HDMI
HDMI
monitors.
®