Setting Up Your Camera - Blaupunkt VIO-DP20 Guía Rápida

3. Setting up your camera

Step 1
Download and install the "Cam4Home" APP to your Smartphone from the App Stores.
Step 2
Connect the camera power connector (see chapter 2, point 4) to the included power
supply cable. Then connect the power supply cable to the power line socket to power
the camera ON. The Red Indicator light will turn on and the device will start booting.
Wait until the booting is completed and the Green Indicator light flashes slowly.
Step 3
Connect your smartphone to a Wi-Fi signal. Make sure that your smartphone
connects to a 2.4 GHz network.
Step 4
Open the "Cam4Home" APP. Register for best Technical Support.
Confirm that you agree to the terms and conditions and then proceed by
pressing the blue "Register" Button.
Step 5
Choose "Camera" and then select "Device Manager" on the left menu and
select the "Add Camera" button.
Step 6
To add a new or factory reseted camera via App there are 2
options available:
Option 1: To install the camera via Wi-Fi please select "Wi-Fi"
Option 2: To install the camera via Ethernet cable, please connect
the camera to the router by using an Ethernet cable and select
"Ethernet".
(Note: For advanced users who want to configure by WPS, please refer to the Web Interface manual.) To
download the Web Interface manual, please visit our website http://security.blaupunkt-service.com
4