ausdom F01 Manual Del Usuario página 2

Troubleshooting:
If the headphones are producing faint or no sound, check the following:
·Make sure your headphone is plugged into an available 3.5mm port. Try
unplugging and re-plugging the headphone's cable.
·Verify that your Volume and Playback settings are not muted and that the volume
for these devices are at least halfway so.
Protect your hearing:
·Listening Advice to Avoid Hearing Damage.
·Listening Via headphones, earbuds or headsets at a high volume may cause
permanent hearing loss to occur.
To establish a safe volume level
·Start your equipment with the volume control at its lowest setting.
·Slowly increase the sound until you can hear it comfortably and clearly ,and
without distortion.
·Avoid setting the volume at a level that prevents you from hearing conversations
and other similar noises around you.
Once you have established a comfortable sound level, leave it there.
If you experience a ringing in your ears, discomfort or muffled speech, reduce .
EN
· ·