Connecting External Audio
Sources
The 3.5 mm auxiliary port 15 can be
used to connect external audio sources:
1.
Open the connection ports cover 12.
2.
Insert one end of the included audio
cable into auxiliary port (Fig. 1).
Connect the other end of the cable to
the audio source.
3.
Press the SOURCE button 7 until
"AUX" appears on the LCD screen.
After disconnecting the audio cable,
reattach the connection ports cover to
protect against dirt/debris.
USB Port
The USB port is designed to only charge
most USB-enabled devices such as cell
phones and external digital media
players. The amperage of the USB
Charging Port is 1.2A.
The USB port is NOT designed to play
music files on USB flash drives or music
players.
Follow the steps below to charge your
USB-enabled device:
Insert the USB end of your device cable
into the USB port 16. Insert the other
end of your device cable into your
device. Your device should begin to
charge.
Note: The USB charging feature is not
guaranteed to work with all USB-
enabled devices.
Controls and Operation
-16-
Hanging Hook
Your unit is equipped with a convenient
hook 8 for hanging. To release the hook,
gently pull the hook from the clasp on
the housing.
selecting the location for hanging the
unit.
hanging hook if it appears damaged or
deformed. This could result in unstable
hanging and the unit unexpectedly falling.
•
Select a suitably sized and shaped
object that will provide adequate
hanging stability. An unstable hanging
surface could result in the tool
unexpectedly falling.
•
Ensure that the unit is hung out of
the way of walkways and working
areas with bystanders. The unit could
be bumped or a bystander could
become entangled causing the unit to
unexpectedly fall.
When not in use, rotate the hook into its
storage orientation and press into clasp.
To reduce the risk of
injury, use care in
To reduce the risk of
injury, Do not use the