Package Contents; Installation & Usage - Conceptronic CI2PSER Manual Del Usuario

ENGLISH
The following items are present in the package of the Conceptronic 2 ports serial PCI
card:
 Conceptronic 2 ports serial PCI card
 Product CD-ROM
 This multi language quick guide
 Turn Off the power to your computer.
 Unplug the power cord and remove your computer's cover.
 Remove the slot bracket from an available PCI slot.
 To install the card, carefully align the card's bus connector with the selected PCI slot on
the motherboard. Push the board down firmly.
 Replace the slot bracket's holding screw to secure the card.
 Replace the computer cover and reconnect the power cord.
Your computer will show the "New Hardware Wizard" on your screen. You can ignore this
"New Hardware Wizard" by clicking "Cancel".
 Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be
shown automatically. Click on "Run Autorun.exe" to start the autorun menu.
 Select "Install Drivers" and follow the onscreen instructions to install the required drivers
for the serial PCI card.
 When the driver installation is complete, restart your computer to ensure the drivers are
correctly loaded.
Your Conceptronic serial PCI card is ready to use.
Conceptronic CI2PSER

1. Package contents

2. Installation & usage
3.