Connecting The Headphone System; Connecting The Processor To Digital Components - Sony MDR-DS4000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1 Connection

Connecting the Headphone System

Connecting the processor to digital
components
Use the supplied optical digital connecting cable to connect the optical digital output
jack*
1
on a DVD player, Digital Broadcasting Satellite Receiver or other digital
component*
2
to the DIGITAL IN jack (black) of the processor.
The connected AV components may require to be set up for optical digital output.
Read their operating instructions.
When connecting the processor to an AV amplifier, etc., connect the DIGITAL OUT
jack (Red) and external optical digital input jack using the optical digital connecting
cable (sold separately).
Processor
To DIGITAL IN
jack (Black)
To DIGITAL OUT
jack (Red)
Notes
• The optical digital connecting cable is an extremely high-precision device and is sensitive to
jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.
• The digital input for the processor does not support sampling frequencies of 96 kHz. Set the
digital output setting for the DVD player to 48 kHz when using this system. Noise may be
heard when a 96 kHz digital signal is input.
1
*
If the connected equipment supports PCM output only, all surround sound effects will be
processed by DOLBY PRO LOGIC II.
2
*
Connection to the optical digital output jack on your personal computer is not guaranteed to
work with this system.
DTS
• A DTS-compatible DVD player is required for playback of DVDs recorded in DTS audio. (For
more details, see the instruction manual of your DVD player.)
• When playing CDs recorded in DTS format, noise may occur when fast forwarding or
rewinding. This is not a malfunction.
• If the DTS digital output is set to "OFF" on the DVD player, no sound may be heard even if the
DTS output is selected in the DVD menu.
• No sound may be heard when a DVD player and this unit is analogue-connected. In this case,
use a digital connection.
Optical digital connecting
cable (supplied)
Match the orientation of
the plug with the jack, and
then insert until the plug
fits into place.
Optical digital connecting
cable (sold separately)
To optical digital
output jack
DVD player, Digital Broadcasting
Satellite Receiver or other digital
component having an optical
digital output jack
To optical digital
input jack
Equipment with optical
digital input terminal such
as an AV amplifier
Connection
(Continued)
GB
13

Publicidad

Tabla de contenido
loading

Tabla de contenido