Publicidad
GB
Carefully retain this instruction manual over the entire period of using the
stroller and, if the stroller is being sold to third parties, also include this
instruction manual.
Only use genuine replacement parts or accessories which have been expressly
recommended by the manufacturer.
If your stroller has an additional deceleration break, this should always be
adjusted so that the breaking wheel does not obstruct.
If your stroller is fitted with air tyres, regularly check the air pressure! (NOTE:
lightly press with thumb). The maximum recommended air pressure is shown on
the tyre. NOTE: air tyres can cause non-removable marks on laminate, parquet or
plastic floors!
If you observe damage or malfunction stop using the stroller and contact your
retailer.
Do not use the stroller nearby open fire or flames, grillers or heating appliances.
The prambody comes with a mattress. Please do not place another mattress on
the mattress included.
Prior to setting up the stroller, ensure your child will not be in contact with
moving parts of the buggy.
Care and maintenance of the stroller:
For the textile parts intended by the manufacturer to be removable and washable,
please read the attached care label. Never use sharp or abrasive cleaning products,
instead use a mild soap solution or a special textile cleaning product.
The plastic parts and the frame can also be cleaned with a soap solution.
After using the stroller in rain or wet conditions, always clean and dry the frame. If
the fabric cover is soaked, allow the stroller to dry in its assembled state.
The wheels should regularly be detached and the axles as well as all moving
connections and the suspension should be treated with an acid-free oil (sewing
machine oil, WD-40 or fat-free lubricant). This helps the stroller run more smoothly
and quietly and limits the amount of early signs of wear.
Care for your stroller and ensure that no flash rust occurs, as this does not constitute
a reason for reclamation.
ATTENTION: The fabrics used are often cotton, blended cotton or poyester fabrics in
high quality which comply with the current legal requirements.
Heavy wear over a prolonged period (e.g. intensive exposure to sunlight) can cause
colours to fade, particularly in natural textiles; however, this does not constitute a
reason for reclamation.
In compliance with EN 1888 / 01.05.2012
As 29.01.2018
Publicidad
