Leak test
Mix up 25 ml of washing-up liquid and 75 ml
of water. Splash a little soapy water on the
� lling valve. If bubbles can be seen in the
area where you splashed water, the � lling
valve is leaking or defective. Please contact
the service centre.
Ignition
Move the � ame adjustment switch (3) the "+"
position.
Push down the ignition safety lock (5) until a
click sound is heard.
Press the ignition button (4). The � ame will
ignite instantly.
20
For safety reasons, the ignition button will
not depress unless the ignition safety lock is
clicked in place.
Flame adjustment
Adjust the � ame lenght during operation by
moving the � ame adjustment switch (3).
Sliding towards "+" position will increase the
� ame lenght. Sliding towards "-" position will
decrease the � ame lenght.
For the best results, keep the � ame lenght at
about 19-38 mm.
Do not use too long a � ame, as it will only
waste fuel.
Turning off
To turn off the � ame, simply release the
ignition button (4).