MEMON memonizerWATER Guia De Inicio Rapido página 8

Instructions | English
Note: the memonizerWATER must
always be installed at a minimum
distance of 2.5 m from the me-
monizerCOMBI!
For an optimal effect, we recom-
mend using the memonizerWATER
only in combination with the me-
monizerCOMBI. For existing filter
or desalination units, we recom-
mend installing the memonizer
behind the unit.
See page 6 for installation diagrams
The water pipe must be free for installation.
Insulations must be removed beforehand.
1
Place the memonizer against the water pipe
and fasten the device on the outer sides with
the supplied Velcro straps.
2
In publicly accessible rooms, the memonizer
can be secured against theft at the middle
eyelet.
3
After attaching the memonizer, put the shield-
ing sleeve over the pipe - the memonizer is
now installed.
4
The memonizerWATER cannot be installed on
plastic composite pipes with aluminium inlet.
The aluminium layer in the composite pipe
prevents the memonizerWATER from func-
tioning. In these cases the memonizerWATER
can be mounted under the water meter.
Covering with the rigid shielding sleeve is
then no longer necessary. Alternatively, the
supplied aluminium-laminated cardboard
can be used.
If you have any questions, please contact our
service department.