Operational Settings; Programming Instructions - sensorswitch WSX Serie Guia De Inicio Rapido

OPERATIONAL SETTINGS

NOTE: ( * ) Indicates factory default (unless otherwise marked)
2 = Occupancy Time Delay
Time sensor keeps lights on after last occupancy detection.
1 30 sec 4 7.5 min 7 15.0 min
2 2.5 min 5 10.0 min* 8 17.5 min
3 5.0 min 6 12.5 min 9 20.0 min
For additional time settings, contact technical support at
1.800.PASSIVE
3 = On Mode
Automatic On turns lights on when occupancy is detected. Manual On
requires a button press to turn the lights on. Reduced Turn-On directs
the sensor to only detect large motions, such as a person entering
a room. Weaker signals, such as reflections from glass, are
ignored. Once lights are on, the sensor returns to maximum
sensitivity.
1 Automatic On* 2 Manual On**
* Standard Factory Default
** Factory Default for -SA and -NL versions
4 = Switch Modes
These modes dictate switch functionality. Pressing the button
in Override Off mode (setting 1) turns off and keeps lights off
until pressed again. Disabling the Switch (setting 2) prevents the
button from turning the lights on.
Predictive Mode (setting 3) automatically determines if a user
has left the room after the lights are switched off. It does this
by monitoring the space for a period after the button is pressed
(Predictive Grace Time), following a certain delay (Predictive
Exit Time). If occupancy is detected the device will disable
auto-on and hold the lights off until manually switched. If no
occupancy is detected the sensor instantly reverts to auto-on
mode. (continued next column)

PROGRAMMING INSTRUCTIONS

Operational settings can be changed via the push-button sequence outlined below (note the example used is for changing occupancy time delay).
1.
1.
5.
5.
While LED
flashes back new
setting 10x...
e.g., 4 flashes
indicates new
7.5 min time
delay setting
Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2014 Acuity Brands Lighting, Inc. All rights reserved 01/26/14
IS-WSX-004
_________________________________________________________________________________________________
If Predictive Mode with Expiration (setting 4) is enabled, once
the sensor has disabled auto-on it will continue to monitor the
space. When no occupancy is detected for a duration equal to the
occupancy time delay, the sensor will revert to auto-on mode.
13 30.0 min 1 Override Off **
2 Switch Disable
3 Predictive Mode
4 Predictive Mode with Expiration*
* Standard Factory Default
** Factory Default for -SA and -NL versions
5 = Photocell Set-Point
The ambient light level at which the sensor prevents the lights
from initially turning on. Once on, the lights will remain on until
the occupancy time delay expires and turns them off.
1 Disabled*
2 Auto Setpoint
3 0.5 fc
3 Reduced Turn-On
4 1 fc
5 2 fc
Note: Sensor will be changed to Automatic On mode if photocell
is enabled. Photocell not present in -NL versions. LED flashes
while Auto-Setpoint mode is running.
7 = LED Operation
Indicates behavior of device's LED.
1 Occupancy Indication*
2 Relay Indication
*Standard Factory Default
9 = Restore Factory Defaults
Returns all functions to original settings.
1 Maintain Current*
______________________________________________________________________________________
2.
Predictive
Occupancy
Grace
Time
Time
Delay
Predictive
Exit
On Mode
Time
16x 2x
15x 3x
Microphone
Grace Period
13x 4x
Dual
12x 5x
Technology
PRESS BUTTON
(Microphonics TM )
11x 7x
10x 9x
Manual On
LED
Grace
Operation
Period
Reset
Minimum
Factory
On Time
Defaults
6.
6.
Microphone
Grace Period
Technology
(Microphonics
C US LISTED
TITLE 20/24
ASSEMBLED in U.S.A.
5 YEAR WARRANTY
6 4 fc
7 8 fc
8 16 fc
9 32 fc
10 64 fc
3 Disabled
4 Override On***
*** Factory Default for -NL version
2 Restore Defaults
3.
4.
e.g., press 2x for 3.
Occupancy Time
Delay
While LED
Switch
Mode
flashes
back current
setting 10x...
Photocell
Set-Pt
e.g., 5 flashes is default
10 min time delay
Predictive
Occupancy
Grace
Time
Time
Delay
Predictive
Exit
On Mode
Time
16x 2x
15x 3x
Switch
13x 4x
Mode
Dual
12x 5x
Photocell
PRESS BUTTON
TM )
Set-Pt
11x 7x
10x 9x
Manual On
LED
Grace
Operation
Period
Reset
Minimum
Factory
On Time e.g., press 2x to
Defaults
save and exit
WARRANTY
5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
10 = Minimum On Time
Required initial time for lamps to be on after each switch on,
regardless of occupancy status. Once met, lights resume
following occupancy time delay.
1 0 min (disabled)* 3 30 min
2 15 min 4 45 min
11 = Manual On Grace Period
Time period after lights automatically turn off that they can be
reactivated by motion. (Manual On (Semi-Auto) mode only).
1 0 sec 2 Unused 3 15 sec*
12 = Dual Technology (Microphonics
Relative responsiveness of Microphonics detection. Included in
-PDT versions only.
1 Normal* 3 Medium 5 Phase Off
2 Off 4 Low
13 = Microphone Grace Period
Time period after lights are automatically turned off that they
can be voice reactivated. Included in -PDT versions only.
1 0 sec 3 20 sec 5 40 sec
2 10 sec* 4 30 sec 6 50 sec
15 = Predictive Mode Exit Time
Time period after manually switching lights off for occupant to
leave the space.
1 5 sec 3 7 sec 5 9 sec
2 6 sec 4 8 sec 6 10 sec*
16 = Predictive Mode Grace Time
Time period after Predictive Mode Exit Time that sensor
rescans the room for remaining occupants.
1 0 sec 3 10 sec 5 30 sec*
2 5 sec 4 20 sec 6 40 sec
4.
30 min
20 min 13x
9x
8x
17.5 min
PRESS BUTTON
7x
6x 5x
15.0 min
12.5 min
7.
7.
LED FLASHES
CONFIRMATION
TWICE
Sheet#: IS-WSX-003
5 60 min
)
TM
(15-10-5 min)
7 60 sec
7 15 sec 9 30 sec
8 20 sec
7 50 sec
8 60 sec
30 sec
1x 2.5 min
2x
3x
5.0 min
4x
7.5 min
10 min
e.g., press 4x
to change
to 7.5 min
PROGRAMMING
COMPLETE
2 of 2