Product Marking - Probuilder 59720 Manual De Instrucciones

Manufacturer: Schou Company A/S
Nordager 31, DK-6000 Kolding
Model: 59720
This pair of protective eyewear meets EN166:2001 standard for Personal Eye Protection that is
legislation to Regulation (EU) 2016/425.
USING THIS EYEWEAR
Always check with your supervisor or safety offi cer to confi rm that the protection off ered by this
pair of eyewear adequate production for your work environment.
This eyewear does not provide protection against high speed particles but meets the requirements
for increased robustness.
It is Class 2 optical and can be worn all day in a normal working environment.
A copy of this product Declaration of Conformance should accompany this User Instructions
WARNING
• This pair of eyewear off ers no protection against IR radiation and thus should not be used as
primary protection in environments where dangerous levels of IR radiation are present, for
example where welding operations are carried out or the casting of molten metal.
• This pair of eyewear should only be used at room temp.
• Whereas this pair of eyewear off ers adequate UV protection against UV sun radiation they
should not be used in any environments where there are hazardous levels of UV radiation
present, such as in UV curing operations.
• Check the eyewear regularly for noticeable scratching, pitting or any other damage to the
lens, scratching, pitting, or other damage to the lens can seriously reduce the level of impact
protection provided by the product. Such product be immediately be discarded and replaced.
• No parts on this eyewear are replaceable or interchangeable. If any part of the eyewear is
deemed unfi t for use then the whole product should be discarded.

PRODUCT MARKING

The product has markings lens housing, which represent the performance of the product and
suitable fi eld of use
Frame marking: ( Lens Housing)
Lens Marking
EXPLANATION OF MARKING:
CE
PROBUILDER
2
S
EN166
10
CE logo
Identifi cation of manufacturer
Optical class
Increased Robustness
Number of the standard
CE PROBUILDER EN 166 S
CE PROBUILDER 2 S