Built-In Recording Function; Technical Specifications - NGS WILDPUNK 1 Manual Del Usuario

ENGLISH

BUILT-IN RECORDING FUNCTION

1. Plug in a microphone to the MIC IN input
2. Insert USB/SD card into the corresponding port, press
MODE button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first
time, the system will automatically create a folder named
RECORD to save recorded files (FAT32 USB file system is
supported).
4. When you are ready to record, press REC button to go to
recording mode. The current sound output will stop and
the MICRO mode will be activated, the screen shows the
recording time. The device starts recording when the
screen shows 00:01 and users can use the microphone to
record.

TECHNICAL SPECIFICATIONS

USB / SD / FM / BT / AUX inputs
Microphone input
Guitar input
LED screen
LED lights
AUX output
Input voltage: AC 100V-240V 50/60Hz
Frequency range: 20Hz ~ 20kHz
WILDPUNK3 WILDPUNK2 WILDPUNK1
Output power: 1000W
Woofer size: 2 x 15"
Tweeter size: 2 x 6"
If at any time in the future you should need to
dispose of this product please note that:
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist.
Check with your Local Authority or retailer for
recycling advice.
(Waste Electrical and Electronic Equipment Directive)
700W 300W
2 x 12" 2 x 8"
2 x 4" 2 x 3"
7