YATO YT-2374 Manual De Instrucciones página 6

GB
Cleaning and maintenance
Once the work has concluded, disconnect the cleaning gun from the compressed air system and remove the coating material
remaining in the tank. Clean the tank thoroughly of the coating material residues.
Clean the enclosure with a soft cloth. Direct the nozzle towards a safe place and blow it for a couple of seconds with clean air.
Clean thoroughly the whole route of the coating material. Careless cleaning will impair the parameters of the coating material jet.
Once the cleaning gun has been cleaned, the movable elements of the sealing must be coated with a small quantity of a
lubricant.
O R I G I N A L I N S T R U C T I O N
6