Publicidad
English
Application
Bus door loudspeaker with inte-
grated loudspeaker and microphone.
Performance features:
• Loudspeaker, voice volume can be
adjusted
• Durable electret microphone
• Work contact for door release,
can be controlled without additional
wiring via existing bus line
• Integrated camera actuation
• A code lock can be connected for
digital call input
• Acoustic feedback when pressing
a call button can be activated
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Servicing
The functional unit can be com-
pletely exchanged if required.
Information regarding replacement
and checking the functional units
can be found in the product infor-
mation for the door station.
1 Connection pcb
For surface mounted door stations:
Connection not via connection pcbs
but in a similar manner as Siedle
Vario using terminal blocks.
Terminal assignment
Ta, Tb
In-Home bus
Vc, GND Camera actuation
Tö
Relay contact door release
CD6
Call wire for
SCOM 611-...
b, c
Power supply 12 V AC
T1, T2
Light button
M1, M2 Pilfer safeguard
4
Installation
Installation, commissioning and
programming are described in the
relevant system manual, which is
enclosed with the line rectifier/server.
2 Programming the call buttons
Please note that when program-
ming the Bus door loudspeaker, the
programming button "b" assumes
the function of the light button.
To actuate using the program-
ming button, use the blunt end of
the plastic key "a" inserted in the
inspection shaft cover.
3 Volume setting
If required, the volume can be
altered at the opening with the
loudspeaker symbol "c" using the
plastic key "a" located inside the
inspection shaft cover.
The programming button and the
potentiometer for volume adjust-
ment are only accessible when the
operating panel is removed.
Information regarding mounting and
removal can be found in the product
information for the door station.
4 Sequence of call button
assignment
(important for Plug+Play program-
ming.)
In the case of door stations with
two-row arrangement of call but-
tons, the first call button is at the
top left.
Specifications
Contact type: Contact 15 V AC,
30 V DC, 2 A
Switching time: DR, 3 sec
Ambient temperature:
–20 °C to +55 °C
Français
Application
Haut-parleur bus avec haut-parleur
intégré et microphone.
Caractéristiques fonctionnelles :
• Haut-parleur, volume de la voix
réglable
• Microphone electret d'une grande
durée de vie
• Contact de travail pour gâche,
sans câblage supplémentaire acti-
vable via ligne bus existante
• Commande de caméra intégrée
• Possibilité de raccordement d'une
serrure codée pour l'entrée d'appel
numérique
• Activation possible de la notifica-
tion acoustique lors de l'actionne-
ment d'une touche d'appel
Tension électrique
L'installation, le montage et l'entre-
tien d'appareils électriques ne
doivent être réalisés que par un spé-
cialiste en électricité.
Service
En cas de besoin, l'unité fonction-
nelle peut être entièrement rem-
placée.
Les informations concernant le
remplacement et la vérification des
unités fonctionnelles se trouvent
dans l'information produit de la pla-
tine de rue.
Publicidad
