Installation And Adjustment - Hyundai HY-CLM09KR-001 Manual De Usuario

water (details see Drainage Instruction s at the end of this chapter). After the water is emptied,
the machine will automatically return to the original state.
3.3 Automatic Defrosting (cooling models have this function): The machine has automatic defrosting
function.Defrosting can be achieved through four - way valve reversing.
3.4、Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection
function after the compressor is turned off.
V.Installation and adjustment
1. Installation：
Warning: before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that the air conditioning
is in the upright position and the air conditioning should be placed on a flat surface. Do not install
and use the air conditioning in the bathroom or other humid environments.
1.1 Install the heat pipe assembly （as shown in Fig.1）
1）take out the outer connector assembly and the exhaust pipe assembly, and remove the plastic bags;
2）insert the heat pipe assembly (the end of the exhaust joint) into the back panel vent slot (push to the
left) and complete the assembly (as shown in figure 1).
1.2 Installation of window sealing plate components
1）Half open the window，and mount the window sealing plate assembly to the window (as shown in Fig.2
and Fig.3).Components can be placed in horizontal and vertical direction.
2）Pull various components of the window sealing plate assembly open, adjust their opening distance to
Figure 1
Licensed by HYUNDAI Corporation Holdings, Korea
Imported/distributed by MARKET MAKER GROUP S.A.
30