Hyundai HY-CLM09KR-001 Manual De Usuario página 31

bring both ends of the assembly into contact with the window frame, and fix various components of the
assembly.1.2 Install the window sealing plate assembly
Notes:1）the flat end of the exhaust pipe joints must be snapped into place.
2)The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the ventilation
of the exhaust pipe not blocked.
Figure 2
1.3 Install the body
1） Move the machine with installed heat pipe and fittings before the window, and the distance between
the body and walls or other objects shall be least 50 cm (as shown in Fig.4).
3）Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the window
sealing plate assembly (as shown in Fig.5 and Fig.6) .
Notes：1、the flat end of the exhaust pipe joints must be snapped into place.
2、The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the
ventilation of the exhaust pipe not blocked.
Figure 4
Licensed by HYUNDAI Corporation Holdings, Korea
Imported/distributed by MARKET MAKER GROUP S.A.
Figure 3
31