Maintenance And Cleaning; Technical Data; Ec-Declaration Of Conformity - Batavia MAXXPACK 18 V Manual De Usuario

MAINTENANCE AND CLEANING

WARNING: Always disconnect from the mains
power supply, before carrying out any mainte-
nance/ cleaning of the charger. Remove the
battery before carrying out any maintenance/
cleaning of the tool.
Maintenance
There are no inner parts of the tool which need
maintenance.
Cleaning
• Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust. Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each use.
• Clean the electric power tool regularly with
a damp cloth and somewhat soft soap.
Do not use any cleaning or solvent materials;
these can attack the device's plastic compo-
nents. Make sure that no water can get inside
the electric power tool.

TECHNICAL DATA

Speed . . . . . . . . . . . . . . 0 – 300 min
. . . . . . . . . . . . . 0 – 1000 min
Impacts per Minute . . . . . . . 0 – 5000 min
Chuck . . . . . . . . . . . . . . . . SDS Plus
Impact Energy . . . . . . . . . . . . . . 0.8 J
Dimensions . . . . . . . . . . 33 × 10 × 19 cm
Weight . . . . . . . . . . . . . . . . . 1.75 kg
Sound Pressure Level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
pA
Sound Power Level L
WA
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand Arm Vibration
Main Handle . . . . . . . . . . . 7.518 m/s
Auxiliary Handle . . . . . . . . . 6.035 m/s
Uncertainty K . . . . . . . . . . . . . .1.5m/s
Drilling Cap. Masonry. . . . . . . . . Ø 20 mm
Drilling Cap. Wood . . . . . . . . . . Ø 20 mm
Drilling Cap. Steel. . . . . . . . . . . Ø 10 mm
. . . . 84.28 dB(A)
pA
. . . . . 95.28 dB(A)
DISPOSAL
Do not dispose of electric power tools
with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of explosion.

EC-DECLARATION OF CONFORMITY

We, the Batavia B.V., Weth.
Wassebaliestraat 6d, NL-7951 SN
-1
Staphorst, declare by our own responsibility
-1
that the product Cordless hammer drill SDS+,
-1
Model BT-CRH001, Item-No 7062511 is
according to the basic requirements, which are
defined in the European Directives Electromag-
netic Compatibility 2014/30/EU (EMC),
2006/42/EC (Machinery), 2011/65/EU (RoHS)
and their amendments. For the evaluation of
conformity, the following harmonized
standards were consulted:
EN 60745-1:2009+A11,
EN 60745-2-6:2010,
2
AfPS GS:2019:01 PAK,
2
EN 55014-1:2017,
2
EN 55014-2:2015
Staphorst, 7 June 2021
Meino Seinen, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
English
9