Sight mark SM25001 Manual Del Usuario página 10

MAINTENANCE
Proper maintenance of the Sightmark LoPro Green Laser is recommended to ensure longevity. It is recommended
that when the sight becomes dirty that it is wiped down with a dry or slightly damp cloth. To clean off dirt and debris
from the laser's aperture, make sure the laser is deactivated. It is recommended to remove the battery to ensure the
laser will not activate during maintenance procedures. Clean the aperture lens with a lens cleaning cloth. No futher
maintenance is required.
TROUBLESHOOTING
Never ship back a product without getting proper authorization beforehand. Doing so could result in losing the
laser sight due to a multitude of reasons, i.e. sending it to the wrong address and other problems associated with
unexpected packages.
If the LoPro green laser does not hold zero:
1) Check that the firearm's mount in securely attached. Also, verify the laser sight is mounted securely to the rifle. If
there is any shifting, retighten the mounting system according to the mounting instructions but do not over tighten.
The sight will need to be re-zeroed afterwards.
2) When test firing a rifle to check that the point of impact is relative to windage and elevation adjustments, firing from
a shooting rest will help eliminate shifting during firing.
3) Be sure to use factory-loaded ammunition of the same bullet type, weight and perferably, lot number.
If the product does not turn on:
1) Check that the battery is in working order. Also, check that the polarity of the battery is correct.
2) Check that there is no residue, film or corrosion on the battery contacts that may be preventing the unit from
activating.
7
GARANTIE SIGHTMARK:
Aller á www.sightmark.com pour plus d'informations sur la garantie.
www.sightmark.com
Copyright © 2012 Sellmark
16