Setting The Timer; Operating Methods - Costway EP23049DE Manual Del Usuario

SETTING THE TIMER

1. Setting the timer off
When the air conditioning is on, press this button, the LED on the timer will activate and meanwhile frame 88
Nixie will blink "00" for 5 minutes, at this time press UP and DOWN to set the time between 1h and 24h. The up/
down settings change from 1h. When the set time expires, the air conditioning automatically turns off.
2. Setting the timer on
When the air conditioning is in standby, press TIMER, the LED on the timer will activate and meanwhile frame 88
Nixie will blink "00" for 5 minutes, at this time press UP and DOWN to set the desired time, and the method to
set it is the same as the timer off. During the setting of the timer, the modes can be selected after the start, if the
air conditioning will start automatically and operate in the selected operating mode.
3. Setting the set time
When the timer is running, if you want to change the current time, you can press the TIMER button once, at
this time frame 88 Nixie will blink and show the remaining time, during blinking press UP/DOWN to increase/
decrease the time based on the original time. If you press TIMER again during blinking, the setting will be
cancelled, i.e. the timer will be suspended.

OPERATING METHODS

1. COOL Mode
• When the unit is on or the timer is on, press MODE to select COOL mode. The corresponding LED is
now displayed on the panel.
• Press UP/DOWN to set the proper temperature in the range of 64-86°F (18-30°C).
• When pressed once UP or DOWN, the temperature will increase or decrease by 1°C or 1°F each time.
• Press SPEED to select the appropriate speed. The LOW and HIGH speeds can be selected directly.
• After selecting COOL mode, press SLEEP on the remote control (or press UP and TIMER on the control
panel simultaneously) to enter SLEEP mode, both the upper and lower fans will be set to low speed.
You can set the time from 1 to 12 hours according to your needs, then it will turn off automatically. If
you want to cancel the SLEEP mode, press SLEEP again or the conversion mode to cancel the SLEEP
function.
2. DEHUMIDIFY Mode
• When the device is on or the timer is on, press MODE to select DEHUMIDIFY mode. At this time the
corresponding indicator light will activate.
•
3. FAN Mode
• When the unit is on or the timer is on, press MODE to select FAN mode. At this time the corresponding
indicator light will activate.
• Press SPEED to select the appropriate speed. The LOW and HIGH speeds can be selected directly.
•
10
www.costway.de