Xtrfy M3 Manual De Instrucciones página 5

ADJUSTING CPI AND POLLING RATE
The CPI switch enables you to adjust your mouse sensitivity
on the fly. By pressing + or – , you can easily switch between
400•, 800•, 1600•, 3200•, 4000•, 6000•, 8000•, 12000• CPI.
The higher the CPI setting, the farther the cursor on your
screen will move when you move the mouse.
The Polling rate switch allows you to adjust the response time
of your mouse. A higher Polling rate means that your mouse
will report its position to the computer more often. 1000 Hz Pol-
ling rate= position updated 1000 times every second. On the M3,
you can switch between 125, 500 and 1000 Hz. A high value will
improve precision, but also use more CPU resources.
CONTROLLING THE LED ILLUMINATION
To adjust the brightness or turn the LED lighting off, press and hold the CPI button on the
underside of the mouse.
TROUBLESHOOTING
Make sure the M3's USB connector is firmly attached to your computer's USB port.
Connect to another USB port.
Connect to another computer.
Cursor movement may be affected by white or very glossy surfaces.
GB
2