Wiring - Jensen Marine MSR2010 Manual De La Instalación Y Operación

MSR2010

WIRING

Power Antenna: Connect to power antenna or amplifier.
12V TURN ON +ACC: Connect to existing radio wire or radio fuse.
Chassis Ground: Connect to ground terminal or clean unpainted
metal part of chassis.
VIEW A-A
WIRE INSERTION VIEW
PIN NO. WIRE COLOR DESCRIPTION
1 GRAY/BLACK RIGHT FRONT SPEAKER (-)
2 GRAY RIGHT FRONT SPEAKER (+)
3 VIOLET RIGHT REAR SPEAKER (+)
4 VIOLET/BLACK RIGHT REAR SPEAKER (-)
5 EMPTY NO CONNECTION
6 GREEN LEFT REAR SPEAKER (+)
7 GREEN/BLACK LEFT REAR SPEAKER (-)
EMPTY NO CONNECTION
8
9 BLACK/SHIELD REAR LINE AUDIO NEGATIVE
10 RED REAR RIGHT LINE LEVEL OUT
11 WHITE LEFT FRONT SPEAKER (+)
12 WHITE/BLACK LEFT FRONT SPEAKER (-)
13 EMPTY NO CONNECTION
14 BLUE POWER ANTENNA
15 RED ACCESSORY/IGNITION (+)
16 BLACK GROUND
17 EMPTY NO CONNECTION
18 EMPTY NO CONNECTION
19 EMPTY NO CONNECTION
20 WHITE REAR LEFT LINE LEVEL OUT
A
A
3
12 Pin Amp Header