Tabla de contenido
Publicidad
CORDLESS DRILL/DRIVER
ININTENDED USE
This tool is intended for drilling in wood, metal, ceramic and plastic; tools with electronic speed control and left/right rotation are
also suitable for screwdriving and thread cutting
TECHNICAL SPECIFICATIONS
NOISE/VIBRATION INFORMATION
●
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Read the manual.
Wear eye protection
Electrical
disposed of with the domestic waste.
PRODUCT ELEMENTS
1
Switch for on/off and speed control
3
Keyless chuck
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mainsoperated
(corded)
(cordless) power tool.
Work area safety
●
Keep work area clean and well lit. Cluttered or dark
areasinvite accidents.
●
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases ordust. Power
tools create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
appliances
must
not
power
tool
or
battery-operated
Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Wear ear protection.
Wear breathing protection
be
Protection class II
2
Switch for changing direction of rotation
4
Ring for torque control
Electrical safety
●
Power tool plugs must match the outlet. Never
modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
●
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
●
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
●
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving
parts. Damaged or entangled cords increase the risk of
electric shock.
Publicidad
Tabla de contenido
