Unicorn Vibe-Tribe Orbit-01 Manual Del Usuario página 5

MODO de LIGAÇÂO "LINHA IN"
A Orbit pode reproduzir qualquer sinal de áudio a partir de uma fonte de áudio externa
ligada através do cabo incluído.
Para selecionar este modo de ligação, colocar o interruptor principal na posição ON.
Ligue à porta microUSB da Orbit o cabo jack 3,5 mm (cabo incluído) e à sua fonte de
áudio externa (por exemplo, PC, smartphone, tablet ...). A coluna Orbit já está pronta
para a reprodução.
CONTROLS & INTERFACES
4.Function LED
1.Main Switch (ON/OFF/BT)
ON Position: Orbit is switched on and waiting signal from cable source
OFF Position: Orbit is switched off
BT Position: Orbit is switched on and waiting signal from Bluetooth source
2.Micro-USB Port
The Micro-USB plug shall be inserted into Orbit to:
Connect an external audio source through 3.5mm jack wired to the audio source.
Charge or power the internal battery through the USB plug connected to PC or to a 5V
power supply.
3.Function LED
Switch in OFF position:
- Red Light: Charging battery
- Green Light: Battery full charged
Switch in ON position:
- White Light: ready to connect the external audio source.
Switch in BT position:
- Blue Light: ready to connect to Bluetooht external source.
4.Integrated Microphone
This is the opening, which marks the position of the microphone. Do not insert anything
into this opening in order to avoid damages to the internal components which will then
not be covered by the warranty.
•
48
2.Micro-USB Port
1.ON/OFF/BT Switch
5