Using The Wps Feature; Wps - Push Button Technology - Conceptronic C300GBRS4 Manual Del Usuario

The Conceptronic C300GBRS4 supports WPS (Wi-Fi Protected Setup). WPS is a standard for easy and secure
establishment of a wireless network. With WPS you can setup and protect your wireless network in just a
few easy steps.
Note: To use WPS with the C300GBRS4, you need to have Wireless Clients which support WPS. If you
have one or more Wireless Clients without WPS support, it is advisable to secure your network
manually using the Setup Wizard, explained in Chapter 5.2.
Note: For more (technical) information about WPS, you can visit the following website:
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
The C300GBRS4 supports two ways to activate and establish a WPS connection:
- Push Button technology
- Pin Code technology
6.1 WPS – Push Button technology
The WPS Push Button technology requires a (virtual) button on your Wireless Client to establish a
connection between the C300GBRS4 and your Wireless Client.
Some Wireless Clients work with a real button to activate the WPS Push Button technology; some Wireless
Clients use a virtual button in their software.
Follow the steps below to activate and establish a WPS connection with the Push Button technology:
A. Press the WPS Button on the front of the C300GBRS4 until the WPS LED starts to blink.
B. Press the WPS Button on your Wireless Client. This can be a hardware button or a virtual button in
the software of your Wireless Client.
The C300GBRS4 will activate WPA security over your wireless network and accepts the wireless connection
of your Wireless Client.
Note: The C300GBRS4 will keep the WPS authentication active for 120 seconds. During this process, the
WPS LED will blink. If there is no connection in these 120 seconds, the LED will turn off and the
WPS authentication process is stopped.
If the WPS feature has not been used before, the wireless network will still be unsecured.
If the authentication of the Wireless Client is successful, the WPS LED will turn off.
Your Wireless Client is now connected to the C300GBRS4 and your network is secured with WPA
Encryption.
You can add more Wireless WPS Clients without losing the connection to previous Wireless WPS Clients.
If you want to add more Wireless WPS clients, repeat step A and B.
Note: The WPA Key generated by the C300GBRS4 is random.

6. Using the WPS Feature

ENGLISH
45