GRAPHITE 59G522 Manual De Instrucciones página 8

Ocultar thumbs Ver también para 59G522:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
GWARANCJA I SERWIS
Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service
tel. +48 22 573 03 85
Ul. Pograniczna 2/4
fax. +48 22 573 03 83
02-285 Warszawa
e-mail graphite@gtxservice.pl
Sieć
Punktów
Serwisowych
i
pogwarancyjnych
dostępna
gtxservice.pl
GRAPHITE zapewnia dostępność części zamiennych oraz materiałów
eksploatacyjnych dla urządzeń i elektronarzędzi. Pełna oferta części
i usług na gtxservice.pl.
Zeskanuj QR kod i wejdź na gtxservice.pl
do
napraw
gwarancyjnych
na
platformie
internetowej
TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
HOT AIR GUN
59G522
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SPECIFIC REGULATIONS REGARDING SAFE USE OF HOT AIR
GUN
This equipment is not designed for use by persons (including
children) with limited physical, sensory or mental abilities, persons
with insufficient experience or knowledge about device, unless
under supervision or acting in accordance with instructions
regarding use of equipment provided by persons responsible for
their safety. Pay attention to children, do not allow to play with the
equipment.
Careless handling of the hot air gun may cause fire, therefore:
- be careful when using the hot air gun in places, where
flammable materials are present;
- do not direct stream of hot air onto the same place for a long
time;
- do not use hot air gun in explosive atmosphere;
- bear in mind that heat can transfer to flammable materials that
are beyond field of view;
- leave the hot air gun to cool down after use and before storing;
- do not leave the hot air gun unattended.
ADDITIONAL SAFETY RULES
• Use protective goggles when operating the hot air gun.
• Do not obstruct air intake holes or outlet nozzle hole of the hot
air gun.
• Do not touch nozzle of the hot air gun during operation or just
after.
• Keep the hot air gun handle clean, do not allow traces of oil or
grease.
• When working outdoors do not use hot air gun when it is raining
or in high humidity.
• Do not put the hot air gun away when it is switched on.
• Do not direct flow of hot air from the gun at one point for a long
time.
• Always switch off the hot air gun with its switch before removing
the power cord plug from mains socket.
• Remove particles of paint deposited on the nozzle of hot air gun
from time to time to prevent spontaneous ignition.
• Prior to commencing any tasks with hot air gun, always ensure
that the surface to be heated is not flammable.
• Removing oil paint that contains lead can be carried out in rooms
with good ventilation only. Vapours of such paints are poisonous.
Use mask for protection of respiratory system.
• When using hot air gun do not use agents such as turpentine,
solvents or petrol.
• Do not touch hot parts of the gun just after its operation has been
finished. Burns resulting from negligence of these rules constitute
main hazard when working with hot air gun.
• Never point operating hot air gun at any person or animal (e.g.
to dry hair). Hot air gun produces much higher temperature than
hair dryer does.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always a
small risk of operational injuries.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido