Tabla de contenido
Publicidad
DANGER: RISK OF FLUID INJECTION AND LACERATION
WHAT CAN HAPPEN
•
Your pressure washer operates at fluid pressures and
velocities high enough to penetrate human and animal flesh
which could result in amputation or other serious injury. Leaks
caused by loose fittings or worn or damaged hoses can result
in injection injuries. DO NOT TREAT FLUID INJECTION AS A
SIMPLE CUT! See a physician immediately!
•
Injuries can result if system pressure is not reduced before
attempting maintenance or disassembly.
DANGER: RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN
•
High-velocity fluid spray can cause objects to break,
projecting particles at high speed.
•
Light or unsecured objects can become
hazardous projectiles.
DANGER: RISK OF UNSAFE OPERATION
WHAT CAN HAPPEN
•
Unsafe operation of your pressure washer could lead to
serious injury or death to you or others.
HOW TO PREVENT IT
•
Inspect the high pressure hose regularly. Replace the
hose immediately if it is damaged, worn, has melted from
contacting the engine, or shows any signs of cracks, bubbles,
pinholes, or other leakage. Never grasp a high pressure hose
that is leaking or damaged.
•
Never touch, grasp or attempt to cover a pinhole or similar
water leak on the high pressure hose. The stream of water IS
under high pressure and WILL penetrate skin.
•
Never place hands in front of nozzle.
•
Direct spray away from self and others.
•
Make sure hose and fittings are tightened and in
good condition. Never hold onto the hose or fittings
during peration.
•
Do not allow hose to contact muffler.
•
Never attach or remove wand or hose fittings while system
is pressurized.
•
When using replacement lances or guns with this pressure
washer, DO NOT use a lance and/or lance/gun combination
that is shorter in length than what was provided with this
pressure washer as measured from the nozzle end of the
lance to the gun trigger.
•
To relieve system pressure, shut off engine, turn off water
supply and pull gun trigger until water stops flowing.
•
Use only accessories rated equal to or higher than the rating
of the pressure washer.
HOW TO PREVENT IT
•
Always wear ANSI-approved Z87.1 safety glasses. Wear
protective clothing to protect against accidental spraying.
•
Never point wand at or spray people or animals.
•
Always secure trigger lock when wand is not in service to
prevent accidental operation.
•
Never permanently secure trigger in pull-back
(open) position.
HOW TO PREVENT IT
•
Do not use chlorine bleach or any other
corrosive compound.
•
Become familiar with the operation and controls of the
pressure washer.
•
Keep operating area clear of all persons, pets and obstacles.
•
Do not operate the product when fatigued or under the
influence of alcohol or drugs. Stay alert at all times.
•
Never compromise the safety features of this product.
•
Do not operate machine with missing, broken or
unauthorized parts.
•
Never leave wand unattended while unit is running.
S
2 — i
ection
mportant
S
o
p
afe
peration
racticeS
5
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
