Beper RI.552 Manual De Instrucciones página 7

Ocultar thumbs Ver también para RI.552:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
EN
Ash vacuum cleaner Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Product description Fig. A
1. Metal Pipe
2. Carry handle
3. Connector for the suction pipe
4. Power button 0 / I
5. Engine
6. Power cord with plug
7. Closing hooks
8. Tank steel
9. Connector for the spear
10. Aluminium spear
11. Hepa filter
Assembling
Disconnect the plug from the socket when you have to remove the various accessories. When using the ap-
pliance for the first time, remove every part or component from the packaging, and proceed with the assembly.
Insert the aluminium spare into the connector.
Insert the metal tube into the suction connector.
Instructions for use
After assembling the product check that the plug is not damaged and plug it in the socket. Press the 0/I button
to switch the appliance on.
To activate the blowing function insert the hose into the connector placed on the lid of the product then press
the button 0/I.
If you hear any unusual noises, switch off the product immediately.
After use
Press the 0/I button to switch the appliance off and remove the plug from the socket.
Release the flexible hose firmly from the air intake connector.
Empty the tank / drum from the collected ash.
Maintenance
It is important to keep the filters clean to improve the efficiency and the life of the product.
Cleaning filter Fig. B
Make sure the product is switched off (the button must be set to 0).
Open the closure hooks and remove the filter.
Wash the filter by rinsing it in plenty of running water from inside the filter to the outside. Do not put in the washing
machine. Help with a brush.
It is suggested to clean the filter at least twice a month.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido