General Usage - Trust Slimline Design Manual Del Usuario

i
A: Tablet status indicator
B: Pre-defined 'Hot Cells' (tap on it to execute
commands or launch programs)
C: Programmable Hot Cells
D: Work area with overlay sheet
1
Place Trust installation CD in CD-ROM drive.
2
Double click CD icon.
3
Double click driver. Follow on-screen instructions.
4
Connect USB.
5
Place batteries in pen and mouse.
6
Open Applications in Finder.
7
Double click 'PenTablet Setting'.
8
Double click 'Tablet Setting' icon.
9
Select 'Button' to customize button commands. [1] Select button. [2] Select command.
Select 'Scope' to customize the work area size. [1] Automatic selection: full area / screen ratio / reserve
10
edged.
[2] Manual selection by dragging edges. Manual selection by dimension and offset values.
Select 'Hot Cells' to customize quick launch options. [1] Enable / disable Hot Cell rows. [2] Select Hot Cell
11
by clicking on it. [3] Click to define action A, B or C :
A
Select 'Run' and click the icon. Browse for program to launch.
B
Select 'Internet', select a specific action and type the address.
C
Select 'Hot Key' to program a key combination.
12
Select 'Pressure'. [1] Test pen pressure. [2] Customize sensitivity.
N otes
U

General usage

• Keep the tablet at least 15 cm away from a monitor, modem or other electronic devices. These devices may
emit electromagnetic interference.
• Do not use both pen and mouse simultaneously. Do not place the mouse on the tablet's work area when the
pen is used, and vice versa.
• Use transparent overlay for holding originals or menu templates in place while tracking.
• Replacing worn out pen tip: (1) Pull out used pen tip with provided tool. (2) Insert new tip. (3) Press pen firmly
on hard surface.
E: Pen button 2
F: Pen button 1
G: Pen tip
H: Mouse scroll b utton
U
1
(no wheel!)
U